HTA鍨�鍚婂紡褰堢哀娓涢渿鍣ㄥ畨瑁濊鏄�
HTA Hanging type Spring shock absorber Installation instructions
瀹夎鍓嶏紝璜嬬⒑瑾嶆窞姹熼泦鍦樺悐寮忓綀绨ф笡闇囧櫒鐨勫瀷铏熷拰瑕�(gu墨)鏍兼槸鍚︽纰恒��
Before installation,make sure the model and the specification are correct.
瀹夎瑾槑
Installation guide
鎵�闇�宸ュ叿锛氬叕鍒跺彛寰�17mm锛圡10锛夈��19mm锛圡12锛夈��24mm锛圡16锛夐枊鍙ｆ壋鎵嬨��
Required tools锛�17mm锛圡10锛夈��19mm锛圡12锛夈��24mm锛圡16锛塷pen wrenches.
鍏堣垏瀹夎浣嶇疆铏曚緷鎿�(j霉)鏂藉伐瑕�(gu墨)鑼冮爯鍩嬬鍚堣嵎閲嶈姹傜殑鍩虹(ch菙)铻烘爴銆傦紙濡傚湒1锛�
Embed required foundation bolts according to the loading on the installation location.(Fig 1)
鍚婂紡褰堢哀娓涢渿鍣ㄧ祼(ji茅)妲�(g貌u)鍦栵細
Hanging type shock absorber?structure drawing锛�
澶栧舰灏哄琛細
Outline dimension table:
| 瑕�(gu墨)鏍� | A (mm) |
B (mm) |
C (mm) |
h1 (mm) |
h2 (mm) |
H (mm) |
BD (mm) |
| HTA-A | 37 | 50 | 25 | 7 | 45 | 80 | 8-10 |
| HTA-B | 40 | 60 | 28 | 7 | 65 | 110 | 10 |
| HTA-C | 70 | 90 | 40 | 25 | 90 | 150 | 12-14 |
| HTA-D/E | 86 | 120 | 50 | 20 | 130 | 200 | 12-16 |
瀹夎瑾槑
Installation guide
灏囧綀绨ф笡闇囧櫒瑁濆埌闋愮暀瀹夎浣嶇疆鐨勮灪鏍撲笂闈紝骞跺皣铻烘爴閹栫穵銆傦紙濡傚湒2锛�
Fit spring dampers on the bolts at the reserved mounting position and lock the bolts.(Fig 2)
灏囧綀绨ф笡闇囧櫒鑸囪ō(sh猫)鍌欓�ｆ帴鐨勭挡鐗欐瑁濅笂銆傦紙濡傚湒3锛�
Fit the spring shock absorber with the wire bar attached to the device.(Fig 3)
浣跨敤涓婁笅鍏╅铻哄附瀹夎鑸囪ō(sh猫)鍌欓�ｆ帴鐨勫浐瀹氳檿锛屼互渚胯(di脿o)鏁达紝姝ゆ檪涓婇儴铻哄附涓嶉渶瑕侀帠绶娿�傦紙濡傚湒4锛�
Use the upper and lower two nuts to install the attachment to the device so that the upper nut does not need to be locked.(Fig 4)
灏囪ō(sh猫)鍌欏畨瑁濇垨閰嶇瀹夎瀹屾垚銆�
Complete the equipeent and piping engineering installation.
浣跨敤闁嬪彛鎵虫墜瑾�(di脿o)鏁翠笅閮ㄨ灪甯戒締瑾�(di脿o)鏁磋ō(sh猫)鍌欐按骞冲強褰堢哀澹撶府閲忋�傦紙濡傚湒5锛�
Apply the open wrench to adjust lower nuts for the balance of the eqipment and the press amount for the spring.(Fig 5)
瑾�(di脿o)鏁村畬鎴愬悗灏囦笂涓嬪叐椤嗚灪甯界浉灏嶉帠绶婏紝鍗冲彲瀹屾垚娣炴睙闆嗗湗HTA鍚婂紡褰堢哀娓涢渿鍣ㄧ殑瀹夎瑾�(di脿o)鏁淬�傦紙濡傚湒6锛�
Lock the upper and lower nuts after adjusting.(Fig 6)
瀹夎鍚庤珛妾㈡煡褰堢哀涓嬪閲忥紝濡傚綀绨у鍒板簳锛屽墖琛ㄧず鑽烽噸涓嶈冻锛屾矑鏈夋笡闇囨晥鏋溿�傛噳瑭叉洿鎻涜純澶ц嵎閲嶇殑褰堢哀娓涢渿鍣ㄥ瀷铏燂紝骞惰珛浜庢湰鍏徃妤�(y猫)鍕欎汉鍝¤伅(li谩n)绯汇��
After the adjustment,check the press amount of the spring.If it appears with insufficient loading,please replace with bigger loading by contacting our staff.
瀹夎鏅� 璜嬫敞鎰忓畨鍏ㄣ��
Be cautious during the installation.
淇濋(y菐ng)闋堢煡锛氭瘡鏈堣瑙�瀵熷浐瀹氳灪鏍撴槸鍚︽湁鏉惧嫊锛屼繚鎸佸綀绨ф笡闇囧櫒瀹夎鏅傚綀绨т笅澹撴挀搴︽槸鍚︽甯搞��
Maintenance checking points:remain M12 fixed bolt locked,balance of the base,installation of the isolator,and the deflection of the spring.
鍦�1锛夊畨瑁濆墠锛岃珛纰鸿獚娣炴睙闆嗗湗鍚婂紡褰堢哀娓涢渿鍣ㄧ殑鍨嬭櫉鍜岃(gu墨)鏍兼槸鍚︽纰恒��
Fig 1锛塀efore installation,make sure the model and the specification are correct.
鍦�2锛夊皣褰堢哀娓涢渿鍣ㄨ鍒伴爯鐣欏畨瑁濅綅缃殑铻烘爴涓婇潰锛屽苟灏囪灪鏍撻帠绶娿��
Fig 2锛塅it spring dampers on the bolts at the reserved mounting position and lock the bolts.
鍦�3锛夊皣娣炴睙闆嗗湗鍚婂紡褰堢哀娓涢渿鍣ㄨ垏瑷�(sh猫)鍌欓�ｆ帴鐨勭挡鐗欐瑁濅笂銆�
Fig 3锛塅it the spring shock absorber with the wire bar attached to the device.
鍦�4锛変娇鐢ㄤ笂涓嬪叐椤嗚灪甯藉畨瑁濊垏瑷�(sh猫)鍌欓�ｆ帴鐨勫浐瀹氳檿锛屼互渚胯(di脿o)鏁达紝姝ゆ檪涓婇儴铻哄附涓嶉渶瑕侀帠绶娿��
Fig 4锛塙se the upper and lower two nuts to install the attachment to the device so that the upper nut does not need to be locked.
鍦�5锛変娇鐢ㄩ枊鍙ｆ壋鎵嬭(di脿o)鏁翠笅閮ㄨ灪甯戒締瑾�(di脿o)鏁磋ō(sh猫)鍌欐按骞冲強褰堢哀澹撶府閲忋��
Fig 5锛堿pply the open wrench to adjust lower nuts for the balance of the eqipment and the press amount for the spring.
鍦�6锛夎(di脿o)鏁村畬鎴愬悗灏囦笂涓嬪叐椤嗚灪甯界浉灏嶉帠绶婏紝鍗冲彲瀹屾垚娣炴睙闆嗗湗HTA鍚婂紡褰堢哀娓涢渿鍣ㄧ殑瀹夎瑾�(di脿o)鏁淬��
Fig 6锛塋ock the upper and lower nuts after adjusting.
榛炴搳涓嬭級锛�
